/men/news_view.aspx?id=764&gp=107
Installation process of vibration engraving machine
Source:本站Time:2024/7/21 9:14:29

The installation process of a vibration engraving machine generally includes the following steps:

1. Preparation: Clean the workbench to ensure it is flat and free of debris. Check if the power cord is intact and if the voltage meets the requirements.

2. Install the spindle: Insert the spindle into the spindle hole of the workbench to ensure its stability.

3. Install the tool: Install the tool on the spindle to ensure its stability.

4. Connect power supply: Insert the power cord into a power outlet, turn on the power switch, and check if the device is working properly.

5. Debugging equipment: Adjust the speed, depth, and other parameters of the equipment as needed to ensure that the carving effect meets the requirements.

6. Start carving: Fix the material to be carved on the workbench and start carving.

It should be noted that when installing and using a vibration engraving machine, relevant safety regulations should be followed to avoid accidents.

  • Top
  • Copyright ? 濟(jì)南華維數(shù)控